4WD ROOF BAGS and AWNINGS
4WD AWNINGS
- Medium weight 8oz Australian canvas
- Either 'zip-bagged' or 'unbagged' awning
- All poles points heavily reinforced
- 'Unbagged' awnings can be flexible and fitted to either side or rear if seperate aluminium rope tracks are installed.
- Extra reinforced eyelets can be fitted at corners on rope side if fitting to rear of vehicle.
- Awning can be made longer than side rope track length such that it extends past end of vehicle.
Note: My recommendation is not to "zip-bag" it. If left as a simple awning sheet it is then multi-purpose and can be used for a variety of things. Remember:- it only takes 10 seconds to slide a canvas awning sheet in to the side track when you set up, but a 'bagged' awning can be ripped off in a split second by a branch when travelling.
4WD ROOF BAGS
- Heavy Ripstop PVC
- ONE-PIECE CONSTRUCTION!!!!
- One of the most storm proof bags you will ever find
- Full height internal 'bucket'
- Rope stitched in to top circumference of internal 'bucket'
- Continious heavy chunky zipper on 3 sides
- Generous cover over zip to eliminate water intrusion
- The OPTIONAL 50mm seat-belt webbing hold down straps are not stitched on (unless requested) to eliminate water 'wicking' in to the bag
One-piece construction!!!
Custom
sizes!
Choose from standard sizes
or
made to your custom size!
Standard sizes
1200L x 1000W x 270H
1500L x 1000W x 270H
1800L x 1000W x 270H
1200L x 1300W x 270H
1500L x 1300W x 270H
1800L x 1300W x 270H
or made to your custom size!!!!
Standard sizes
or made to your custom size!!!!
Sizes can be emailed to you (see email "button" on "Contact" page)
CANVAS Things
Everything
Australian Made

-
Quoted prices and postage apply to within Australia only
724 Yan Yean Road, YARRAMBAT, Victoria 3091
ALL CANVAS PRODUCTS SHOWN HAVE BEEN MANUFACTURED BY THE SOLE OWNER personally.
Product photographs are the property of Canvas Things and cannot be reproduced, copied, printed or used in any way without contract or written permission.